jwaller
Evil Genius/SyTy Guru
Re: Odd timing issue
I'm with him on this one you might have gotten the wrong tan wire. check that again to be sure. it's just before the wiring harness goes through the firewall and into the engine partment.
leroy said:Sounds like you may have disconnected the wrong tan wire. The set timing connector is a good foot away from the ecm, towards the center of the dash at about the level of the top of the carpet.
If you don't disconnect the tan wire, timing will be way off.
HTH,
Jim
I'm with him on this one you might have gotten the wrong tan wire. check that again to be sure. it's just before the wiring harness goes through the firewall and into the engine partment.