92 Ty 1173
Active member
I made a 3" dp, welded up the O2 bungs, one in the stock location and one about 6" behind it, so 12" behind the turbo. So I go to install the gauge and see that PLX recommends the sensor is 36" downstream from the turbo. F*&k, s*&t!! So my question is how critical is it that the sensor is not 36" from the turbo? Do I need to get another bung and weld it in? If so at least I was smart enough to section and v-band the dp so it won't be too hard to remove.