Tuning Tutorials

turbodig

Active member
Re: Tuning Tutorials

It's a little tricky finding the area where you make those port settings in Win7 Dig... I finally figured out that instead of clicking on 'advanced settings' you have to click on the little 'administator' change button once you get into the device manager. I found a setting of '16' on the port setting got rid of all of the dropout errors on DM and TP4.
I'll be doing some logging tomorrow morning and will report back if I see progress in any other areas.

I'll play with some as well... if we can find a group of settings that work for TP5, it'll be awesome.
 

MRKING

New Parts for Old Trucks
Re: Tuning Tutorials

Hood It would be a great find if Adam or Ian saved the video from the memorial meet tech session in daytona beach years ago . You explained everything thoroughly with the older popular methods and $58 tuning practices .
 

sytyguy

Moderated User
Re: Tuning Tutorials

Hood It would be a great find if Adam or Ian saved the video from the memorial meet tech session in daytona beach years ago . You explained everything thoroughly with the older popular methods and $58 tuning practices .
I'll do up a $58 tutorial (should just have to go over tuning differences as hardware/etc....is all the same). Will try to push it out right after the tuning tutorial next week. :tup:
 

turbodig

Active member
Re: Tuning Tutorials

I'll do up a $58 tutorial (should just have to go over tuning differences as hardware/etc....is all the same). Will try to push it out right after the tuning tutorial next week. :tup:

The differences in the closed throttle/open throttle table will be important, also the fact the VE numbers are combined in the closed and not in the open.

I'm kinda wondering do people mean real $58 (ie, stock code) or Ultimate-style $58... The table axis will be different.
 
Last edited:

sytyguy

Moderated User
Re: Tuning Tutorials

I was gonna tune a stock bin for the $58 tutorial.....as in BBZB. I may just make it an addendum to the regular tuning video, as I'm not gonna spend a ton of time showing $58 tuning (the videos are to get people started and take the "scariness" out of the picture). Code59 tuning, datalogging, and learning how to get started with your own truck is what I feel compelled to address. I want to encourage people to get out there and tune and show the ease of it along with the rewarding results that come from it.
 

Sean Krupa

Moderator
Re: Tuning Tutorials

Michael,

You and a couple other guys were telling me in the beginning of summer to go Code59 because of the capabilities. I was nervous about going that far and didn't even know how to hook it up. With the help from my mentor Rob, we got rewarding results and all the time and money paid off. I got my goal for the year.

 

It's just a six

Super Member
Re: Tuning Tutorials

Congrats on the run!!!
Looks like you spun pretty good?

I am so computer challanged.
Mike, How about a tutorial on just getting TP5RT to get up & running & recording?
Thanks

Rick
 

sytyguy

Moderated User
Re: Tuning Tutorials

Did you watch the first video? It covers getting TP installed and running....along with some tuning basics. I'll go over datalogging in the next video.
 

It's just a six

Super Member
Re: Tuning Tutorials

I watched it, probably just do much info for me to remember.

I was just thinking of making just one tutorial vid for just the TP5RT .

Thanks
 

It's just a six

Super Member
Re: Tuning Tutorials

Just saw your Autoprom video.
Very nice BTW.

As far as hooking up the G1 adaptor to the memcal, what memcal should I be using?

I have the stock 2bar memcal, pitbull memcal, 3 bar custom Sean Morris memcal.
Thanks
 

sytyguy

Moderated User
Re: Tuning Tutorials

Like I mentioned in the video...we only use the esc circuitry when piggybacked. So, as long as you have a chip with SyTy esc circuitry (ATR, KB, etc...), then you are fine.
 

It's just a six

Super Member
Re: Tuning Tutorials

Ok, just so I know what the esc circuitry is on the memcal, it would be the side not covered by the ATR pit bull chip sticker.

Sorry for the dumb q's.:oops:
 

sytyguy

Moderated User
Re: Tuning Tutorials

Correct. It's the circled part in this picture:

2zyvq0z.jpg
 

It's just a six

Super Member
Re: Tuning Tutorials

Hey Mike,

the vids are great.
Just wondering what your next vid will be?
I am looking fwd to seeing it.

Great job! :tup::tup::tup::tup:
 

sytyguy

Moderated User
Re: Tuning Tutorials

I was hoping to have a tuning video up this past week, but didn't have the time. I may make a quick datalogging video to address some questions I've seen about that. I want the tuning video to be as informative as possible, so I may have to take a little more time on that. Look for *something* very soon though.
 

It's just a six

Super Member
Re: Tuning Tutorials

Hey,
good news my friend got the TP5 hooked up & we were emulating & making a couple changes in the A/F ratio @ idle.

Great success!

Question though.
I have the auto prom & the Moates Tutorials tell you to position both the 10K switch & the pass through switch to the right on the autoprom box. Pass through postion.

When we selected it this way, we cannot get TP5 to work (states harware not found) so when we select to outboard switch to the left, then the TP5 works, it emulates , we can make changes etc.

http://www.youtube.com/watch?v=GDzeSi5nmoo&list=FLC47WILAMLZIhl7pE8DUelg&index=10

Just wondering if we are doing something wrong or is the Moates tutorial incorrect?

So basically the switches are selected torwards each other. We do not use the 10K switch but we use the other switch in the moates mode. Not the pass through mode.
Confused a bit.

BTW , we had the G1 adaptor hooked up & the rest of the components all hooked up if that makes a difference?
Thanks for making these videos, we got it working now @ least.

Next, need to hook up my LM1 into the ECU.
 
Last edited:

sytyguy

Moderated User
Re: Tuning Tutorials

Ya know, it's been a little while since I've used my autoprom. Lemme fire it up this weekend and I'll verify everything for you.

Also, I started work on the next tutorial (Datalogging) yesterday and should have it complete this weekend. I would have it done now, but the screen recording software interrupts the com ports while recording so it prevents datalogging from being screen recorded. I'm gonna play with some of the code on the software and fix it this weekend. Should have something up on.....say....Monday.
 

It's just a six

Super Member
Re: Tuning Tutorials

Ya know, it's been a little while since I've used my autoprom. Lemme fire it up this weekend and I'll verify everything for you.

Also, I started work on the next tutorial (Datalogging) yesterday and should have it complete this weekend. I would have it done now, but the screen recording software interrupts the com ports while recording so it prevents datalogging from being screen recorded. I'm gonna play with some of the code on the software and fix it this weekend. Should have something up on.....say....Monday.

Thanks & looking fwd to next vid.:tup::tup:
 

Black Knight

I Glow Therefore I am
Re: Tuning Tutorials

Hood,

At 4:00 min in the "Getting started with Tuner Pro video" you mention clicking the "acquisition" tab. I don't have an acquisition tab.

Do I need to turn on or enable something?

Thanks

Can we please make this a sticky?
 

IpHoOnDyou

New member
Re: Tuning Tutorials

Hood,

At 4:00 min in the "Getting started with Tuner Pro video" you mention clicking the "acquisition" tab. I don't have an acquisition tab.

Do I need to turn on or enable something?

Thanks

Can we please make this a sticky?

Do you have Tunerpro? Or TunerproRT?? TunerproRT is the one with the accusation option!

HTH
 
Top