QUICK STORM
B.A.M.F. BMW Tech
Re: yet another failed emissions thread
outlet should be hotter than inlet
outlet should be hotter than inlet
sy#2921 said:right now is a custom burn from turbo dig all i know is it is calibrated for the 50#'ers and the 3bar map and suppose to be conservative. I really only need to reduce the fuel at an idle since they dont even check the nox literally no reading comes out only n/a in both fields. I think i have narrowed the problem down to a leaky/faulty injector or just a rich tune.
sy#2921 said:right now is a custom burn from turbo dig all i know is it is calibrated for the 50#'ers and the 3bar map and suppose to be conservative. I really only need to reduce the fuel at an idle since they dont even check the nox literally no reading comes out only n/a in both fields. I think i have narrowed the problem down to a leaky/faulty injector or just a rich tune.
sy#2921 said:its says ,kris 50#, if you want i can read whats on the chip into a binary file and send that to you or just send you a list of mods, i will be getting my datamaster cable soon so i might be able to get some logs as well
turbodig said:Ah, that'd explain it.
If that's the same one I'm thinking of, it's a delta off what BG did with the truck, which was
open loop all the time. Probably pretty rich.
If you have a burner, I'll send ya a file to try. Send me a PM.
later,
Dig
turbodig said:Ah, that'd explain it.
If that's the same one I'm thinking of, it's a delta off what BG did with the truck, which was
open loop all the time. Probably pretty rich.
If you have a burner, I'll send ya a file to try. Send me a PM.
later,
Dig