Search results

Re: Vortec intake options Hmmm. I couldn't find them earlier. Using the stock tb is going to save me a lot of hassle.

Re: Vortec intake options I need one of these side facing. Looks like my options are make it myself or use a Wilson elbow and a round TB. Anyone else have pictures of their converted intake setups?

Re: Tire Recommendations Im running a Nitto NT555 in a 17. My father just got a 19" for his mustang. Looks like they only make them in a drag radial in stock size?

Re: 0 compression problem solved? High idle could be a vacuum leak. I would also pull the TB and clean out the IAC passages. Possibly carboned up. We dont have a MAF sensor. You need to have a 2 bar with a 2 bar tune.

Re: super special edition Sy#7470 53k mls $12.5k Vin is from a 2001 Saturn

Re: 93 TY #0428 61k mls Everything thats been dorked with is repairable. Its a clean bodied, low mileage white/white 1 owner truck with low miles. Anyone want to speculate price here?

Re: Are you on Facebook? I visit both FB and here daily. FB does not have near the resource as the message board does, but its nice for a quick question.

Re: FS: block, crank and caps, trw pistons, vortec head What castings are the Bowtie heads?

Re: Wide 17" Wheel Options Possibly something from BMW? I was looking at aftermarket stuff of theirs before I found my corvette wheels.

Re: Syclone Kenne Bell Headers + More Does anyone know if these fit angle plug heads by chance?

Re: I'm back They figured out the exact #s and colors produced

Re: Turbo upgrade question 67mm You have all the mods to support it. Rode in a truck recently that had a 70mm with similar mods.

Re: Running a little rough Glad you found it. These trucks like to eat ignition components.

Re: Was SyTy hacked? Been getting them as well.

Re: Values creeping back up Its not a surprise if values are creeping up. There has been a few recent articles online and both a Sylone and Typhoon have been featured in tv programs recently.

Re: 2000+ spindle/knuckle Upgraded brakes I bet. Some of the second gen calipers were dual piston.

Re: Sy/Ty 4.3L Short Block For Sale Its probably best to call or text him. He does not frequent the msg board much.

Re: Brake upgrade options How I did the proportioning valve mod: Remove the bleeder looking thing from the front of the prop valve. This is the section for the rear brakes. Remove the valve and spring that are inside. I used a #8 screw and tapped the bleeder and threaded in the screw. Reinstall...

Re: Brake upgrade options LS1 brakes here. ABS delete and I modded the prop valve for the rears. Brakes have saved the truck a few times. Fbody going to probably be the easiest to find in the yard also. Vendor has the brackets, e brake cables if you want to retain that.

Re: Running a little rough Make sure you dont have any vacuum leaks. You can get a bicycle tire tube and cut it in half by the valve stem. Tie the long end. Clamp the other end over the intercooler inlet. Pump it full of air. Listen. Liquid soap and water for hard to find leaks. I replaced all...