Search results

  1. dgoodhue

    '96 4.3 vortec build

    Re: '96 4.3 vortec build The cam that you spec'd is decent for a stock cam, it much more aggressive than your stock one. Normally I would agree with Quickstop assessment of 1.6RR being a waste on cam swaps and vortec's, because stock Vortec peak at .450 lift and even ported Vortec don't flow...
  2. dgoodhue

    Newly rebuilt Ty 92 #0021

    Re: Newly rebuilt Ty 92 #0021 Hey Matt, you're alive! I hope all is well. I actually assumed you broke something and your ty was up on jackstands. If you plan on going to go the track let me know. I am planning on making at least a couple trips this year.
  3. dgoodhue

    Found two cargo nets and rest of Kenne bell cold air kit, nets don't fit

    Re: Found two cargo nets and rest of Kenne bell cold air kit, nets don't fit I think the nets rope shrink or at least become less elastic. My old 93 Ty had a cargonet where one side off when I bought it. It was real bitch get that side back on.
  4. dgoodhue

    Setting initial timing

    Re: Setting initial timing The stock balanced can slip so you need to verify the balancer timing mark is TDC.
  5. dgoodhue

    broke down. ac bad

    Re: broke down. ac bad It depends on what is wrong with your AC. If the clutch is bad you can unplug the electrical connector on top so it does not engage. If the compressor would glowing red the bearings in telhe compressor might be bad. Some have deleted the ac using a smaller belt that...
  6. dgoodhue

    Back Seat

    Re: Back Seat GM had a rear seat flop kit to fix rear seat flop in the typhoon.
  7. dgoodhue

    Todd Austinson 10 in 1 chip

    Re: Todd Austinson 10 in 1 chip Looking at your pictures that is an earlier 10n1 chip. It doesn't even appear to be a 3bar chip. Yes it is outdated.
  8. dgoodhue

    Twin 52mm vs. twin 58mm TB thoughts...

    Re: Twin 52mm vs. twin 58mm TB thoughts... The stock throttle body is a 48mm and was based off the 89-92 TPI. I am with Jeremy in that their are minimal gains on most SyTy to be had with a larger throttle body.
  9. dgoodhue

    Trouble with 1,9 KR all the time

    Re: Trouble with 1,9 KR all the time Do you have the stock chip properly piggy backed to the velosyty chip?
  10. dgoodhue

    OH ATR Chip

    Re: ATR Chip The 138A was a stock injector chip. It had more aggressive timing than the street chip.
  11. dgoodhue

    1992 Typhoon 0546 rebuild

    Re: 1992 Typhoon 0546 rebuild Definitely having the vehicle where you live makes a big difference. When I first moved out, I had an apartment that was 15 minute from my parent house where I garaged my Corvette, I accomplished very little on working on it and I didn't even drive it that often...
  12. dgoodhue

    Rebuild, stock cam?

    Re: Rebuild, stock cam? http://www.ebay.com/itm/NOS-OEM-GM-CAMSHAFT-ASM-10214714-/222196767604
  13. dgoodhue

    Rebuild, stock cam?

    Re: Rebuild, stock cam? Their is one currently on eBay. Is your original damaged or do you not have an original camshaft? The CCS-38 has slightly less lift than the original city cam .359 vs .351 (intake) and .386 vs .390 (exhaust).
  14. dgoodhue

    Turbo Size

    Re: Turbo Size Your going to need bigger injectors than 42# for even a 6262.
  15. dgoodhue

    Syclone Floor mats

    Re: Syclone Floor mats Any interest in selling them? I was going to buy a set from Ray.
  16. dgoodhue

    Are you on Facebook?

    Re: Are you on Facebook? x4
  17. dgoodhue

    Experienced Coil Over Conversions

    Re: Experienced Coil Over Conversions Coilover rear shocks should resolve your bottoming out issues with lowering springs or blocks.
  18. dgoodhue

    WTB Syclone Door Panels

    Re: WTB Syclone Door Panels I am still looking for a set of Syclone door panels. I really just need the lower carpet portion to make mine stock again, I just haven't come up with a good solution.
  19. dgoodhue

    Future collectibility???

    Re: Future collectibility??? There has been upward movement in the pricing of Syclones especially in the last 3 years. I would guess a pristine 20k mile stock example is probably now $30K truck and that was before the $50K Mecum example, which maybe an aberration. I have seen nice 50-70K mile...
  20. dgoodhue

    transmission won't shift from reverse

    Re: transmission won't shift from reverse It is likely that it did not fall off from slamming the shifter. Someone was probably had the shifter apart and didn't seat that clip properly.
Top