Search results

  1. dgoodhue

    Mecum $50k Syclone

    Re: Mecum $50k Syclone Syclone sticker was $25,500. My Syclone new actually sold for $16,900. Either way it still is horrible investment. The only way someone could have made decent money on Syclone as a collectible is if someone bought a mint low miles Syclone in the 2009-2012 time period...
  2. dgoodhue

    Used syclone torque converter

    Re: Used syclone torque converter My observation is at 125k+ most SyTy transmissions are not far behind for wearing out either.
  3. dgoodhue

    Ray Moore (yar) needs your prayers now more than ever

    Re: Ray Moore (yar) needs your prayers now more than ever RIP yar :( I had bought some syty parts from him this past spring. He was asset to this community and will be missed. When myclone was tragically crushed by his truck, yar donated a whole bunch of syty stuff for the fundraiser that this...
  4. dgoodhue

    awd

    Re: awd The front and rear spin at the same speed but with the open front differential usually one of the front wheel spins faster than the rear while the other front wheel barely moves.
  5. dgoodhue

    Turbo upgrade question

    Re: Turbo upgrade question Personally, I would probably do the 62mm. The 67mm has the potential for 700+ hp at high boost levels. A 62 has the potential for well past 600 maybe 650hp. I am guess your built transmission isn't a 4L80e either. You probably don't have enough injector for a 67mm...
  6. dgoodhue

    Custom cam

    Re: Custom cam What do you for a build? The Steve Morris cams in video I have heard sound pretty aggressive and seem to have a lopey idle.
  7. dgoodhue

    Custom cam

    Re: Custom cam I only paid $3xx for a custom cam from comp cams. The 415 Is designed for na applications, but the specs aren't bad for a turbo motor. .500/.500 210/215 112deg lobes. The stock cam is anemic. .359/.390 179/195 (not sure the of the lobe separation.) IMO a 415 is more than a...
  8. dgoodhue

    LS swap section?

    Re: LS swap section? The LS swaps go into the SyTy conversions section. Most of the posting activity in that section is LS swaps now.
  9. dgoodhue

    Turbo Suggestions

    Re: Turbo Suggestions I have only run unto 18psi. I don't have a built motor, so I haven't been pushing the turbo. It ran high 11's @115 with 14.5psi and 19 degrees of timing. I think with a better launch and more agressive timing I can get to run mid 11's with around 15psi. I have 9.3:1...
  10. dgoodhue

    Turbo Suggestions

    Re: Turbo Suggestions You will need a different down pipe. I think the AC bracket will need to be clearances and you will need to hose to connect the turbo outlet to the stock I/C (if you are using that, I am using an aftermarket A2A IC). You will easily run out of injector as well.
  11. dgoodhue

    Turbo Suggestions

    Re: Turbo Suggestions I would use a GT35R, but I am little biased since my truck uses a GT35R compressor wheel. It should have the potential to run 11's in Typhoon with your mods and high boost.
  12. dgoodhue

    shift points

    Re: shift points http://www.syty.net/forums/showpost.php?p=1107076&postcount=3 The shift points can vary a little by the mods done to the transmision but that should put you in the ball park.
  13. dgoodhue

    Was SyTy hacked?

    Re: Was SyTy hacked? If the user isn't already banned (line through username and banned member status) just report them and delete the message. It isn't helpful to report already banned members. I try to keep up with them when I get the messages. Some of the spammers pm me as well.
  14. dgoodhue

    Ty cuts off when cooling fan comes on.

    Re: Ty cuts off when cooling fan comes on. My truck would stall or nearly stall when my aftermarket electric fans turned on with an ultimate chip. I modified the tune to add in fan anticipation IAC steps and that cured it. Your truck's tune wasn't designed for sudden the electric load of...
  15. dgoodhue

    2000+ spindle/knuckle

    Re: 2000+ spindle/knuckle I understand why one would do the conversion for the improved brakes. If you read his post, he is adding cts-v calipers and z06 rotors which will require adapters anyways whether or not he used the 1st or 2nd gen spindles.
  16. dgoodhue

    2000+ spindle/knuckle

    Re: 2000+ spindle/knuckle That seems like a lot of work for the newer style bearing.
  17. dgoodhue

    How is this possible?

    Re: How is this possible? I remember the transition from e-mail distributions list to forums. The diehard email list fans were slow to adapt and some never made the transition. Email lists seemed more personable, but the forums allowed one to filter what they read what and were much easier to...
  18. dgoodhue

    How is this possible?

    Re: How is this possible? This trend of less activity on SyTy.net is happening across many different forums. People are posting on Facebook. I don't complete get it, Facebook is convenient for pictures, memes, video and the general comments, but it is pointless to ask technical questions that...
  19. dgoodhue

    Doug DeMuro Typhoon Video

    Re: Doug DeMuro Typhoon Video Good job, Steve :tup:
  20. dgoodhue

    Bubba's hacked up ****ery on some poor guys Typhoon

    Re: Bubba's hacked up ****ery on some poor guys Typhoon The owner who is out 50K actually might be better off than if Bubba 'fixed' her 66 GTO.
Top