Search results

  1. tbauer03

    Wiring Harness Question(s)

    Re: Wiring Harness Question(s) Thank you. I appreciate the clarity. Motor should be finishing up from the machine shop soon and things will start going back together in due time.
  2. tbauer03

    Wiring Harness Question(s)

    Re: Wiring Harness Question(s) Dave I got it separated here is what is left. I just want to check before making any more cuts Coolant Temp Large Black Ground Oil pressure this was hacked up and had 3 grey pigtails from it with just one orange connected the other 2 wires were open Fuel pump...
  3. tbauer03

    Wiring Harness Question(s)

    Re: Wiring Harness Question(s) The coil has a white wire running to the ecm do I just cut it and save the pink one? And two black/white wires from the fuel pump relay and something else that lead to ground with 5 black/white and a tan wire going back to the Ecm.
  4. tbauer03

    Wiring Harness Question(s)

    Re: Wiring Harness Question(s) I am still digging into it but my areas of confussion are the pink/black wires that converge near the egr connector, the black/white connector going to ground, ic relay, the coil white and pink, and oil psi orange appear to go in both directions
  5. tbauer03

    Wiring Harness Question(s)

    Re: Wiring Harness Question(s) I have started tearing my harness down. maybe I was naive or doing it wrong but I thought everything would pull apart into 2 sections one to the ecm and side to the firewall. But it is a tangled mess appearing to have connectors going in both directions. Do I need...
  6. tbauer03

    SYTY Spring Cleaning

    Re: SYTY Spring Cleaning I got your paypal refund. Thanks. If the part shows up out of the blue i will send the $ back. I hope that is the case.
  7. tbauer03

    Nats Chicago group road trip.

    Re: Nats Chicago group road trip. I will be coming through St Louis. I could join the caravan depending on your depart time. St. Louis is about a 7 hour drive from Omaha.
  8. tbauer03

    SYTY Spring Cleaning

    Re: SYTY Spring Cleaning I double checked with my apartments clubhouse. They still haven't received that seat cover hinge. Do you have a tracking number?
  9. tbauer03

    SYTY Spring Cleaning

    Re: SYTY Spring Cleaning $ sent for hinge. Please ship to 14441 sprague ct, Omaha, NE, 68116 Thanks
  10. tbauer03

    SYTY Spring Cleaning

    Re: SYTY Spring Cleaning I could use the passenger seat hinge cover. Random but do you happen to have the passenger side PCV "T" setup. I could use that too.
  11. tbauer03

    WTB pass side PCV T

    I am looking for the stock PCV setup off the passenger side valve cover. The T and 2 90's let me know if you have one and how much to ship it to Omaha, NE.
  12. tbauer03

    Corvette Assembly Plant Tours

    Re: Corvette Assembly Plant Tours I am interested how much would the private tour cost?
  13. tbauer03

    Installing the Holley EFI Dominator - 4.3/4L80E

    Re: Installing the Holley EFI Dominator - 4.3/4L80E Sounds like a good time keep us posted. I will be doing the Holley swap soon.
  14. tbauer03

    Negative Crankcase Pressure Setups

    Re: Negative Crankcase Pressure Setups I have read bad things about electric pumps reliability and pulley driven pumps seem to be for race only motors. Has anyone gone either of these directions and care to comment? Don I like your idea I might be able to make that work using a 90 degree...
  15. tbauer03

    Negative Crankcase Pressure Setups

    On my old set up I never got it set up to draw a vacuum to the crankcase under boost because I just had a filter directly on the turbo as a temporary solution that went beyond temporary. The stock setup is a very nice set up that makes good use of vacuum and the the PCV's but I was trying to get...
  16. tbauer03

    Holley HP install and tips

    Re: Holley HP install and tips It plugged right in and appears to be a great solution. I am still months away from finishing the project though to know if it really works but I am confident that it will.
  17. tbauer03

    Oil Cooler Needs?

    I recently had a motor tear its self apart and I need to replace my oil cooler to get rid of contaminants. I previously ran a setrab 50-619 The motor I am building will run 11's do I need to run a bigger cooler? Or even a cooler at all? I have heard a lot of guys just running a short filter off...
  18. tbauer03

    Holley install pics. ??????

    Re: Holley install pics. ?????? I am mocking mine up where the existing ECM fit in. Its a Dominator and sticks out a little bit of the bottom but isn't visible from a normal vantage point.
  19. tbauer03

    Burning Oil, Good Compression

    Re: Burning Oil, Good Compression It was converted to 4 bolt. The machinist is going to do a sonic test of the block before we decide to go 40 over or a new block. How much of a gamble is 40 over? Is the biggest fear cracking the block?
  20. tbauer03

    Burning Oil, Good Compression

    Re: Burning Oil, Good Compression Thanks for the insight Dave. The motor is at the machine shop and I may not be back there for awhile. Detonation is probable i'll try to get more pictures whenever I can.
Top