Search results

  1. tbauer03

    Shift cable adjustment?

    I am running a 4L60E and when I last parked it I kept having issues getting the truck back to park. Is there an adjustment for this or has my cable stretched?
  2. tbauer03

    Burning Oil, Good Compression

    Re: Burning Oil, Good Compression The rods should be reusable and the heads just need reworked and hopefully the block but yeah everything else is Likely junk.Have many gone 40 over with the block?
  3. tbauer03

    Turbo Suggestion

    I have a stealth 70 turbo right but had a motor tear itself apart which put metal into the oil and likely my turbo will need to be rebuilt or replaced. I like the stealth 70 because at the time it was the biggest turbo i could put in the truck while retaining the AC. And I would like to keep...
  4. tbauer03

    Burning Oil, Good Compression

    Re: Burning Oil, Good Compression Motor is toast. I had a second shop tear it down and like the first shop they said the motor looked like there was over 100k on the motor. There was a lot of metal floating around, it beat out the bearings, pistons, crank shaft, etc etc. So I have a complete...
  5. tbauer03

    Transmission dipstick tube

    Re: Transmission dipstick tube I have lubed up the grommet with dish soap to help the tube go in. It Worked well.
  6. tbauer03

    Garage Sale, 4l80e controller, PLX R-500, Propshaft Loop and more

    Re: Garage Sale, 4l80e controller, PLX R-500, Propshaft Loop and more It is still for sale paypal me at tbauer03@hotmail.com Also send me your address and I'll get it mailed out to you. Thanks
  7. tbauer03

    Garage Sale, 4l80e controller, PLX R-500, Propshaft Loop and more

    Re: Garage Sale, 4l80e controller, PLX R-500, Propshaft Loop and more Transmission controller has been sold. Wideband still available.
  8. tbauer03

    Holley HP install and tips

    Re: Holley HP install and tips The vss pigtail is to the left and when the main transmission connector is plugged in it is too short to reach the speed output. The turbine however has plenty of length and the same weather pack connector. Which is why I was wondering if I could use that pigtail...
  9. tbauer03

    Holley HP install and tips

    Re: Holley HP install and tips Sorry if I wasn't clear. I have 60e and the length of the vss pigtail isn't long enough to reach the back of the transfer case. If it were two wheel drive the vss port would be closer and it would fit. I believe the harness wasn't designed for a 4x4 application...
  10. tbauer03

    Holley HP install and tips

    Re: Holley HP install and tips I know you went without the tranny controller but I was looking at mine and the vss pigtail is too short because of the transfer case. I could probably hook up the turbine sensor without adding on extra length to the wires but would that register the same as the...
  11. tbauer03

    AC/heater box clean up

    I painted my firewall this past weekend and now the ac heater box stands out like a sore thumb. What have you guys done to clean this up? Will paint hold on to the plastic?
  12. tbauer03

    Motors Out Holley EFI Coming Soon

    Re: Motors Out Holley EFI Coming Soon I have been happy with the 422 what specific gains are expected out of the Steve Morris cam. I.E. hp, torque, acceleration,etc. Budget is getting tight so help me justify $500+ so i can explain to my wife.:blah: I pm'd Alex and got a generic sales pitch...
  13. tbauer03

    Jags That Run motor mounts

    Re: Jags That Run motor mounts i talked too their customer service they said to go ahead and enlarge the slotted holes. A carbide burr made quick work of it.
  14. tbauer03

    Holley Dominator Location Ideas

    I got my wiring harness in the other day but I am still waiting on the computer. While I am waiting on that I cut a piece of cardboard to replicate the dimensions of the cpu. I believe it will fit in the stock ECM location after removing all the factory mounting points. But it will stick out by...
  15. tbauer03

    Garage Sale, 4l80e controller, PLX R-500, Propshaft Loop and more

    Re: Garage Sale, 4l80e controller, PLX R-500, Propshaft Loop and more Prices Dropped
  16. tbauer03

    Jags That Run motor mounts

    Re: Jags That Run motor mounts Is there supposed to be two different frame mounts? I was shipped two identical frame pads and neither of them line up to the passenger side frame rail. Both fit the drivers side perfectly.
  17. tbauer03

    Tires for 9.5 x 16 wheels?

    Re: Tires for 9.5 x 16 wheels? Cool did they through off your speedometer enough to warrant recalibration? Any adverse effects that I am not considering
  18. tbauer03

    Tires for 9.5 x 16 wheels?

    Re: Tires for 9.5 x 16 wheels? mickey thompson now makes a drag radial in that size. Would these work on all 4 corners of stock wheels. They would be a little taller than stock if I am thinking it through correctly and would this require a mph calibration...
  19. tbauer03

    Garage Cleanup - Lots of Parts

    Re: Garage Cleanup - Lots of Parts interested in the gun metal gray wheels
  20. tbauer03

    Garage Sale, 4l80e controller, PLX R-500, Propshaft Loop and more

    Re: Garage Sale, 4l80e controller, PLX R-500, Propshaft Loop and more Bump
Top