Search results

  1. tbauer03

    Burning Oil, Good Compression

    Re: Burning Oil, Good Compression lots of good question I'll try to answer what i know now. I believe i did a decent job sealing the intake. I didn't wait to long and I used the felpro gaskets for vortec heads with the blue bumps for the water ports. I laid a bead around the coolants and...
  2. tbauer03

    Burning Oil, Good Compression

    My truck has been burning oil for a while now but i haven't been driving it much. Any way today I took the spark plugs out and did a compression test. All Cylinders were within 10 percent and most right at 168, with cylinders 5 and 6 a little bit lower. But overall nothing to concerning. They...
  3. tbauer03

    Towing Trailer

    Re: Towing Trailer http://www.uhaul.com/Trailers/Sport-Trailer-Rental/ST/ This trailer loaded with pillows would be pushing it.:lol: If you put a 4l80 in it, it would definitely help but then I would really worry about the brakes. I have seen pictures of members on here pulling boats before. So...
  4. tbauer03

    Silicone turbo 2 intercooler connections

    Re: Silicone turbo 2 intercooler connections Thanks. I measured mine today and the id is 2"
  5. tbauer03

    Running Like Crap

    Re: Running Like Crap If my memories serves, the cat is one of those that looks like a converter but is actually just a straight pipe.
  6. tbauer03

    Silicone turbo 2 intercooler connections

    I have been using a radiator hose i pulled off the shelf at autozone. It sorta fits for my setup but it bottle necks the air flow. I was looking at this site http://www.siliconeintakes.com/ to use a 90* elbow off the turbo, an aluminum pipe, and then a hump hose to connect to the intercooler...
  7. tbauer03

    Running Like Crap

    Re: Running Like Crap PTE Stealth 70. The oil feed line is still the stock braided line.
  8. tbauer03

    Running Like Crap

    Re: Running Like Crap I changed the o2 sensor today and it still does the same thing when it switches to closed loop. I have no idea what is triggering it to go into closed loop or what needs to be done to get it back to open loop. The conditions seem to be pretty consistent but the choice...
  9. tbauer03

    Running Like Crap

    Re: Running Like Crap I took a good second look at the datamaster file when the ecm switches to Closed Loop operation is when it runs way out of whack. When it is in Open Loop it runs good just rich. It seems to run in open loop when i first start the car and it stays in open loop until I shut...
  10. tbauer03

    Running Like Crap

    Re: Running Like Crap I hooked up a fuel pressure gauge in the cab to make sure my fuel pump wasn't cutting out when the truck runs lean and I got data master to work. So I made another run around the neighborhood. http://www.filedropper.com/testmay3rd Truck ran rich but ok the first third of...
  11. tbauer03

    Datamaster No Com Selected

    Re: Datamaster No Com Selected Restarting the cpu enabled it to recognize the port but it wouldn't sync with the PCM. I am guessing the cable adapter isn't going to work unless you guys know a trick.
  12. tbauer03

    Running Like Crap

    My Typhoon was burning oil and i figured it was getting sucked into an intake runner because i had just resealed the lower intake due to it at the rear china wall. This time I resealed the lower intake with RTV around all the ports and used rtv on the bolts as well. The last time I didn't have...
  13. tbauer03

    Datamaster No Com Selected

    My old serial laptop no longer works so I tried connecting my new laptop up to data master. I used the serial aldl cable with a serial to usb adapter that I bought from Office Depot. I installed the driver for the usb cable and plugged everything up and turned on the truck. When I go to record...
  14. tbauer03

    Wideband 02 Sensor Bad?

    Re: Wideband 02 Sensor Bad? How do i calibrate it? I have a PLX-R500 and I thought it auto calibrated. Also I was doing some reading and it looks like there is now a LSU 4.9 sensor that does not use reference air and would never require free air calibration, but i can't find anything that says...
  15. tbauer03

    Wideband 02 Sensor Bad?

    I got my Typhoon back together after taking it apart because it was burning oil through the engine and leaving a watery oil mix on the ground by the exhaust. I took the lower intake off and re-sealed everything with new gaskets and RTV. Seems to not be leaking now. But I think I damaged the...
  16. tbauer03

    What did you do to your SyTy today? (part 2)

    Re: What did you do to your SyTy today? (part 2) i drove it!!!:tup:
  17. tbauer03

    Any Consensus On Sealing Intake 2 Vortec Heads

    Re: Any Consensus On Sealing Intake 2 Vortec Heads Man tough crowd on the April Fools Department.:cry: Joking aside I took the manifold off yesterday. The bolts are Fine Thread 3/8-24 grade 8 Not sure why the machine shop went with those but 8 are 1.5" long, 3 are 1' long (noted as short)...
  18. tbauer03

    Any Consensus On Sealing Intake 2 Vortec Heads

    Re: Any Consensus On Sealing Intake 2 Vortec Heads I got it sealed up yesterday using Flex Seal saved me money on gaskets.
  19. tbauer03

    '15 Nats Postponed

    Re: '15 Nats Postponed That would be cool. Sorry to hear about the cancellation though.
  20. tbauer03

    Any Consensus On Sealing Intake 2 Vortec Heads

    Re: Any Consensus On Sealing Intake 2 Vortec Heads I pulled a bolt, there wasn't much of anything on it, just a thin line where the rtv hit at the point of the gasket. Can I just pull one bolt out at a time, add RTV, then reinstall it without breaking the lower intake seal or is that just...
Top