Re: aldl interface without 12 volts.
canadian said:
has anybody come across any sort of aldl interface hardware that doesn't require 12v to run it? i've seen all the schematics on the net and a large number of different hardware pieces, but they all require some sort of 12v source to power them.
does anybody know of a "passive" aldl stream converter that doesn't require power? i'm guessing the chips need 12v to run properly?
I've never externally powered any data cables, either DM or Diacom.
The DM cable has a plug only for the few laptops that may be out there
that can't drive the handshake lines well enough to provide ~100 mA
of current.
If you really wanna, use a 9v battery as was suggested above... I guess
I wouldn't bother.
Diacom does simliar things... uses the printer handshake lines to drive
signals Hi/low. It has an advantage of not having to convert from RS232
signaling levels to TTL. (Like all the serial cables do)
I made my own cable with a MAX 232 years ago when the chips first
started becoming available. Have yet to find a laptop that won't power
it sufficiently, but I also use 2 lines (through a diode) to power the cable.
Plenty of current capability.
Later,
Dig